=
 
 
 

Window & Door Supercaulk White (LC-130)

This siliconized, indoor/outdoor acrylic latex caulk offers superior flexibility and adhesion for all common surfaces. An excellent door and window caulk, it provides an airtight and watertight seal that will not crack or peel, and it's available in five colors to match popular architectural styles.

Also Available

Non-Solvent (Clear) (LC-130)

Non-Solvent (Color) (LC-130)

 

LIQUID NAILS clear window caulk, almond window caulk, clear window caulk, gray window caulk, sandstone window caulk, white window caulk

Key Features

Recommended For:

window and door frames, siding and trim, stucco, plaster, electrical and utility boxes, painted surfaces, baseboards, wood, aluminum, concrete, stone, metal, moldings, brick, masonry, glass and vinyl.

NOT Recommended For:

applications below the waterline, aquariums, automotive uses, on top of silicone, wet or green wood and for gaps wider than 1/2".

Available Sizes

  • 10.1 fl. oz. cartridge

Coverage

  • 10.1 fl. oz. cartridge covers 30 lineal ft.

Max VOC

26.1 GPL

Specifications

ASTM C-834

Additional Colors

This caulk is available in many popular colors (shown below) to reduce or eliminate the need for painting. Note that the colors on this page are for comparison only and may not match the actual colors of this caulk exactly due to differences between monitors, browsers and computer platforms.

 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Clean and dry surface thoroughly before applying this caulk. Remove any old caulk with mineral spirits. Fill any deep joints with solid filler to within 1/2" of surface. This caulk should be applied in dry weather at temperatures above 40°F (4°C). Do not use this caulk when rain is expected within 24 hours.

Cartridge Application

Load caulk cartridge into standard caulking gun. Cut nozzle at 45° angle for desired bead size (marked on nozzle). Apply continuous bead of caulk into gap at 45° angle. Smooth over with wet gloved finger or tool until level with surface.

Painting Guidelines

Paintable with oil or latex paint. For best results, wait 24 hours, longer under humid conditions.

Squeeze Tube Application

Knead caulk tube to soften contents. Cut tip at 45° angle where marked for desired bead size. To apply caulk, start at back end and squeeze towards nozzle. Under constant pressure, apply continuous bead of caulk into gap at 45° angle. Smooth over with wet gloved finger or tool until level with surface.

Drying Time

Caulk skins over within 10 minutes. Completely dry in 72 hours. For best results, allow 24 hours before painting this caulk.

Cleanup

If the caulk is wet, use water. If the caulk has dried, scrape it away.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 
 
;