Surface Preparation
Surfaces must be clean, dry and structurally sound. Apply in well-ventilated area.
Applying The Product
Apply a bead of adhesive to one surface. For best results, join surfaces together within 10 minutes. Tape or brace as needed until adhesive has dried, typically 24 hours. Parts may be repositioned for up to 20 minutes after joining. For faster tack or "grab", apply adhesive, press parts together, then pull back apart for 1 to 3 minutes, press parts back together.
Ceramic And Other Tile
For decorative tiles, wall inlay panels or cork tiles, apply 3 or 4 ribbons of adhesive to wall and press tile into place. Heavy tile may require bracing for 24 hours.
Wood
Apply a bead of adhesive to the back of trim and press into place. For wood strips, apply 2 ribbons of adhesive to the back of each strip and press into place.
Drywall
To serve as a backing for drywall patches, adhere strips of wood 3" (7.6 cm) longer than the hole, behind the opening with adhesive and allow to dry 24 hours. Use LN 700 adhesive to affix properly sized patch to the wood backing strips and finish edges in the conventional manner.
Countertops
Peeling countertops can be secured by applying LN-700 to base and pressing firmly. Use a clamp to temporarily hold the countertop in place.
Storage
Learn how to keep your adhesive fresh for next time.
Vinyl Cove Base
Apply 2 beads of adhesive to back and press firmly to wall.
Shelving
Apply a bead of adhesive to back of brackets. Press brackets firmly against wall. Pull assembly apart and let air-dry for 5-8 minutes, allowing the adhesive to set. Press brackets back into place and hold with masking tape for 48 hours.
Cleanup
Water for wet adhesive. Scraping, followed by wiping with a clean cloth dampened with mineral spirits, for dried adhesive.