=
 
 
 

Heavy Duty Construction Adhesive (Low-VOC) (LN-903/LNP-903)

This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/interior adhesion. It's also considered a "green glue" because it is low-VOC.

Also Available

Solvent (LN-901/LNP-901)

Non-Solvent low-VOC trowelable (LNP-903)

 

LIQUID NAILS® Heavy Duty Construction Adhesive — Low-VOC

BUY NOW



VIEW DEMO

Key Features

Recommended For:

many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

flooring applications, ceramics, mirrors, granite, marble, plastic or vinyl.

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge
  • 1 Gal. can
  • 1 Quart can

Coverage

  • Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.
  • 1 Gal. can covers 60 to 90 sq. ft.
  • 1 Quart can covers 15 to 22 sq. ft.

Max VOC

70 GPL

Specifications

ASTM C-557

*Please note that the typical dry time for most construction adhesives is approximately 24 hours. This may vary due to temperature, humidity amount of product applied and surface porosity.
 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

For best results, construction adhesive and both surfaces should be above 60°F. All substrates must be structurally sound and free from grease, dust, dirt and flaking coatings. New plaster must be fully cured before applying construction adhesive.

Application Prep

Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire.

Walls

Apply 1/4" bead of construction adhesive directly onto studs and plates. Press drywall firmly against construction adhesive. Adjust as necessary. Holding drywall's outer edges, nail every 16" and inside the field as necessary. Note: If studding is perfectly true, nailing inside field will not be required.

Ceilings

Apply 1/4" bead of construction adhesive to rafters. Fasten drywall's outer edges with nails 12" on center. Fasten center of field with a nail at each rafter. Drywall larger than 4' x 8' should be fastened with 2 nails in the field of each rafter.

Laminating

Apply 1/4" bead of construction adhesive to structure. Some uses include drywall to drywall and drywall to block walls.

Drying Time

Working time: Up to 20 minutes. Very warm temperatures will decrease working time. If construction adhesive becomes dry, scrape it off and reapply.

Cleanup

If the construction adhesive is wet, use soap and water. If the construction adhesive has dried, use mineral spirits.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 

Learn more about the uses and advantages of LIQUID NAILS Heavy Duty Construction Adhesive.

View Video View Video
 
 
;