Polyurethane Adhesive (Low-VOC) (LN-950)

This polyurethane construction adhesive (a low-VOC "green glue") offers excellent weather resistance and low-temperature flexibility for a strong bond both indoors and outdoors and on a wide range of materials and surfaces.


Polyurethane Construction Adhesive


Key Features

Recommended For:

bonding building materials (concrete, lumber, etc.) to subfloors, tileboard, treated lumber, cabinets, foamboard, countertops, granite, marble, drywall, ceramics, mirrors, plastic, vinyl, 1/8" MDF paneling, brick veneers, plywood and waferboard.

NOT Recommended For:

ceiling tile.

Available Sizes

  • 10 fl. oz. cartridge


  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.


115 GPL


ASTM C-557 and ASTM D-3498

*Please note that the typical dry time for most construction adhesives is approximately 24 hours. This may vary due to temperature, humidity amount of product applied and surface porosity.

Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Surfaces must be clean, structurally sound and free of loose particles before applying construction adhesive. For smooth surfaces, adhesion can be improved by lightly sanding bond areas prior to applying construction adhesive. Wear gloves when using this construction adhesive.

Product Application

Insert cartridge of construction adhesive into a standard caulk gun and puncture inner seal with a nail or wire. Apply a 1/4" wide bead of construction adhesive to one of the surfaces to be bonded. Join the surfaces together within 30 minutes and press firmly so that the construction adhesive is 1/16" to 1/8" in thickness. Use mechanical fasteners or bracing to hold surfaces together until the construction adhesive has set (about 8 to 12 hours, depending on temperature, humidity and porosity of the surfaces). Do not use this construction adhesive at temperatures below 40° F.

Drying Time

Construction adhesive will normally dry within 8 to 12 hours. Actual dry time may vary with temperature, humidity and materials used.


If the construction adhesive is wet, use mineral spirits or toluene. If the construction adhesive has dried, scrape it away.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.