=
 
 
 

Outdoor Repair Adhesive (LN-209)

This clear adhesive bonds almost everything indoors and out and in any weather condition. Its low-odor, waterproof formula works on wet surfaces, and stays flexible to absorb impacts. Perfect for use on camping gear and gardening tools, it grabs in seconds and no clamping is usually required. This product is certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.

 

Liquid Nails Outdoor Repair Glue
Key Features
  • Withstands temperatures from -60–300° F
  • Low odor
  • Flexible & shock absorbing
  • Instant grab
  • Waterproof
  • Works on wet surfaces
  • Patented technology
  • ASTM D4236
 
Recommended For:
  • Canvas
  • Nylon
  • Rubber
  • Vinyl
  • Ceramic
  • Metal
  • Most Plastics
 
Not Recommended For:
  • Polyethylene
  • Polypropylene
 
Available Sizes
  • 0.75 fl. oz. squeeze tube
Coverage
  • 0.75 fl. oz. squeeze tube covers 9 lineal ft.

Max VOC
< 7% by wt.
 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation 
Surfaces must be clean and free from any loose matter. Surfaces may be damp. NOTE: For faster bonding, dampen surfaces lightly with water before applying adhesive.
 
General application
Press surfaces together within 5 minutes after applying adhesive. For better tackiness, pull surfaces back apart for 3-5 minutes, then rejoin. Surfaces may be adjusted for 10 minutes after joining. Adhesive will reach initial cure in one hour and full cure in 6-8 hours.

Sealing a Tear
If ends cannot be overlapped, then lay ends as close together as possible. Lay a bead of glue over entire tear and a little past each end. Smooth bead so that it forms a thin film on both sides of tear. Wipe away excess with a dry cloth.

Bonding Pieces End-to-End
Find a suitable piece to use as a “splint” to reinforce the repaired joint. Apply glue to the splint over the area that will be in contact with the repaired piece. Apply glue to both ends of joint. Join all pieces together as desired and brace or clamp.

Plastics, Metals, and Non-porous Surfaces
Plastics, metals, and non-porous surfaces that can be bonded with this product include aluminum, steel, brass, PVC, fiberglass, rubber, neoprene, nylon, ABS, and polystyrene. This product cannot be used to bond polyethylene or polypropylene. Apply a bead of glue to one of the surfaces to be bonded. Spread the bead to cover the surface to be bonded. Join the surfaces together, then pull them apart and let stand for 5 minutes before pressing back together. For a quicker bond, mist the surfaces lightly with water before rejoining. Allow 1 hour before light use and 8 hours before normal use.
 
CLEAN UP
Uncured adhesive may be removed by wiping with a clean cloth. Dried adhesive may be removed by scraping.
 
DISPOSAL
Contains organic constituents which may cause adverse effects to the environment if disposed of improperly. Allow unused portions to air-dry before placing in normal refuse for disposal. Do not place partially-filled containers in open fires.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 
 
;