=
 
 
 

Mirror (LN-930)

This mirror adhesive by LIQUID NAILS Adhesive will not desilverize mirrors. Ten minutes of working time allows for precision placement on most surfaces, and the flexible bond will not become brittle with age. As with any mirror adhesive, this product must be used with a permanent mechanical support system, such as a shelf angle or "J" channel.

 

LIQUID NAILS mirror adhesive

Key Features

  • Will not desilver mirrors
  • Permanent bond
  • Heat and steam resistant
  • Stays flexible

Recommended For:

bonding mirrors to concrete, drywall, plaster (primed or sealed), painted surfaces, wood and metal.

NOT Recommended For:

exterior use, uses other than mirror installations, or applications to wallpapered surfaces, foamboard or treated wood.

Available Sizes

  • 10 fl. oz. cartridge

Coverage

  • 10 fl. oz. cartridge covers 6 sq. ft.

Max VOC

199 GPL

 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Install permanent support system prior to the application of mirror adhesive. Surfaces must be clean, dry and structurally sound. For painted surfaces, lightly sand paint with coarse sandpaper.

Product Application

Insert tube of mirror adhesive into caulking gun, cut nozzle and puncture inner seal. Apply mirror adhesive to mirror back in 2 to 3 inch diameter globs at least 1/2" thick, per every square foot of mirror. Hang mirror on support and press into place within 10 minutes. The mirror adhesive should be less than 1/8" in thickness after installation. Do not remove mirror once in place. Tape or brace top of mirror to hold in place until mirror adhesive has set, usually 48 hours. Do not seal edges for one week.

Cleanup

Use mineral spirits to clean up both wet and dry mirror adhesive.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 
 
;