=
 
 
 

Heavy Duty Construction Adhesive (LN-901/LNP-901)

This heavy duty LIQUID NAILS adhesive is formulated for especially demanding projects. A tried-and-true professional construction adhesive, it bridges gaps, provides 10 minutes of working time and produces a long-term, flexible and impact-resistant bond. It also contains antioxidants for durable, all-weather performance.

Also Available

Non-Solvent low-VOC (LN-903/LNP-903)

Non-Solvent low-VOC trowelable (LNP-903)

 

LIQUID NAILS Heavy Duty Construction Adhesive

VIEW DEMO

Key Features

  • Exceptional holding power
  • Excellent gap filling
  • Bonding the heaviest materials
  • Durable and flexible
  • Extreme weather formulation
  • Waterproof, weatherproof bond will outlast project

Recommended For:

many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

flooring applications, ceramics, mirrors, granite, marble (real or cultured), plastic, vinyl, ceiling tile, subfloors/underlayment, or 1/8" medium density fiberboard paneling.

Available Sizes

  • 28 fl. oz. cartridge
  • 10 fl. oz. cartridge

Coverage

  • 28 fl. oz. cartridge covers 88 lineal ft.
  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 32 lineal ft.

Max VOC

401 GPL

 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Surfaces must be clean, dry and structurally sound.

Product Application

Cut construction adhesive nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire and continue as directed below.

Cabinets And Countertops

Apply a 1/4" bead of construction adhesive to contact areas on the back of cabinets or countertops. Press firmly into place. Mechanical fasteners must be used in addition to construction adhesive for installing wall cabinets.

Materials To Furring Strips Or Studs

Apply zig-zag 1/4" bead of construction adhesive to each strip or stud to be covered by panel. Position panel so edges meet at stud center. Only severely warped materials require finishing nails at top and bottom.

Drying Time

Up to 20 minutes. Very warm temperatures will decrease working time. If construction adhesive becomes dry, scrape it off and reapply.

Cleanup

Use mineral spirits to clean up both wet and dry construction adhesive.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 

Learn more about the uses and advantages of LIQUID NAILS Heavy Duty Construction Adhesive.

View Video View Video
 
 
;